New Voice. Turning off the system home And outside Can be controlled from a mobile home immediately.

ATI AT1800 Series Amplifier

ATI Multi Channel Amps %PM, %26 %590 %2018 %13:%Aug
Rate this item
(0 votes)


AT1800 Series

The AT1800 shares key hallmarks with its larger siblings, the AT2000 and AT3000’s. The AT1800 is available in 6 configurations from the AT1802 2-channel model to the AT1807 7-channel version. Power is conservatively rated at 180 Watts RMS/channel into 8 Ohms from 20Hz to 20kHz with no more than 0.03% THD and I.M. distortion. Each model comes equipped with two toroidal transformers, a detachable IEC power cord, optically coupled protection circuits, soft-start circuit and convection cooling eliminating the need for fans. Units can even be upgraded at the factory to add additional channels (up to 7).

Like all other ATI amplifiers, the AT1800-series amps are cooled by large heat sinks, not by cooling fans. This feature may be especially important in this amplifier, which is likely to find use in many home theater systems that do not hide the equipment in a rack or closet.

You can set this amp right next to your favorite listening chair without having to worry about fan noise. An optically-coupled protection circuit automatically shuts down the amplifier in an overload situation, such as when someone accidentally cuts into a speaker cable and shorts out the amp. Once the protection circuit is engaged, it checks the conditions every 10 seconds, and restores output automatically when the overload situation is remedied. The protection circuit is optically coupled to the audio circuit; because there’s no direct electrical connection, the protection doesn’t affect sound quality. A magnetic circuit breaker provides further protection and eliminates the need for cumbersome fuses.

The AT1800-series amps use the same transformer construction as the top-of-the-line AT3000 and AT2000 series amps: MOH cores with bifilar windings, built in our own factory. It also uses double-sided glass epoxy circuit boards and the same rugged, powder-coated chassis used in all our products.

Even the AT1807, with 1,260 total watts, will not trip your household circuit breaker or dim the lights when you switch it on. High power amps draw a momentary—but tremendous— inrush of electrical current when you turn them on. The AT1800-series amps do not, thanks to ATI’s Ultra Soft Turn-On circuit. This circuit gradually powers up the amp, to ease the load on your household circuits. And the amp includes a trigger input that allows it to be turned on and off.

Remote Trigger

Protection Circuits

Toroid Transformers

Circuit Boards

Soft Start Circuitry

Power Transistors:

Power Cord

7-Year Warranty




Activated from 3.3VDC to 24 VDC via a heavy-duty relay

Optically –coupled with full automatic reset.

40% more efficient than EI type. Separate bi-filar windings for each channel guaranty lower noise and crosstalk.

Double-sided, FR-4 glass-epoxy, computer-grade boards are assembled in-house.

Ultra soft turn on reduces in-rush current to a minimum. Multiple units can be turned on without tripping circuit breakers eliminating the need for sequencing.

High-current, bi-polar output transistors with active bias circuits result in effortless operation.

Detachable, 3-wire cord.

Parts and labor against defects in parts or workmanship.

17"W X 7"H X 161/2"D (plus 1" for I/O jacks)

57 to 95 lbs (model dependent)


Read 243 times

Lorem ipsum dolor sit amet consectetuer Curabitur enim id et ornare. Consequat urna elit urna Ut elit interdum est magna Donec tortor.

More in this category: « ATI AT54XNC Series Amplifier

Social Media

Facebook :
Line ID : ya-save
Line ID : 0818414322
Youtube :


Tel : 02- 102-2211-2 Fax : 02-102-2212
Mobile : 081-823-6045, 081-841-4322
Website :
E-mail :